A single-station fixture with manual screw clamping or a pneumatic cylinder, for job shops and maintenance departments that need a repeatable set-up without the cost of a hydraulic system. Typically supplied for drilling, tapping, milling outlines and face work on parts up to 300 mm.
We build two families: a modular body that takes standard clamps and can be re-drilled for the next part, and a dedicated body machined to your part geometry when the batch justifies it.
Technical data
| Clamping | Manual screw with torque limiter, or pneumatic cylinder 6 bar |
|---|---|
| Part envelope | Up to 300 × 300 × 200 mm |
| Location accuracy | 0.02 mm; repeatability 0.01 mm |
| Body | Cast iron HT250, machined datum faces, blackened steel details |
| Clamping force | 2–12 kN per clamp, depending on element |
| Base | T-slot keys or plain base with mounting holes |
| Options | Quick-change jaw plates, wear plates, chip guards, hoist eyes |
| Typical use | Drilling, tapping, milling outlines and faces, deburring set-ups |
How it is built
Priced for the job, not for the showroom
A simple manual fixture should not cost like a hydraulic one. This range exists so that low-volume and repair work still gets a proper fixture instead of a clamped-down angle plate.
Re-machinable body
The modular body has enough meat to be re-machined for the next part family. Locating pins are replaceable, so the fixture outlives the first job.
Safe manual clamping
Torque-limited handles stop an operator from over-clamping a thin wall, and the clamp height is set so the handle cannot foul the tool path.
Indicative price
- Product code
- DB-FIX-MANUAL-01
- Minimum order
- 1 set
- Lead time
- 3–5 weeks
FOB Liuzhou, indicative for standard configurations. A drawing moves the number inside the band.
Ask a question about this partQuestions
Manual or pneumatic — which should I buy?
Can I use my own clamps?
Do you supply the air preparation unit?
How is it shipped?
Send a drawing and get a number
3D model, machine table drawing, the operations and the annual volume — that is enough for a quote within one working day.
Related products
Manual and pneumatic single-station fixture
Hydraulic multi-station fixture for CNC machining centres
Built to your drawing: one set-up, several parts per cycle, repeatable to 0.01 mm.
Precision self-centring machine vise
Jaws close symmetrically, so the datum stays in the middle of the travel.
Axle housing and large housing fixture
Long, awkward castings held without distortion, machined on all faces.