WORKHOLDING · LIUZHOU, CHINA
Workholding built to your drawing, not to a catalogue
Hydraulic multi-station fixtures, tombstones, 5-axis rotary fixtures, precision vises, dividing heads and expanding mandrels. Designed from your 3D model, machined in our own shop, proved out before shipment.
01
What we make
Nine product families, all machined in-house. The list below is the whole range — we do not pretend to make everything, and we do not resell fixtures bought elsewhere.
Hydraulic multi-station fixture for CNC machining centres
Built to your drawing: one set-up, several parts per cycle, repeatable to 0.01 mm.
Manual and pneumatic single-station fixture
The workhorse fixture: quick to make, cheap to change, honest to use.
Rotary fixture for 5-axis machining centres
Keeps the part clear of the tool axis in every orientation, without losing location.
Tombstone multi-face fixture for horizontal machining centres
Four faces, one set-up, no re-clamping between operations.
Precision self-centring machine vise
Jaws close symmetrically, so the datum stays in the middle of the travel.
Universal dividing head with manual drive
Index the part by angle, not by eye: 1:40 worm, ±30 arc-seconds.
Expanding mandrel for bushings and thin-wall sleeves
Locate on the bore, clamp along the full land: the wall does not go oval.
Axle housing and large housing fixture
Long, awkward castings held without distortion, machined on all faces.
Carbide inserts: Seco, GESAC APKT and turning grades
Milling, turning and grooving inserts, with a grade cross-reference instead of a guess.
02
Why buyers send drawings to a shop this size
You talk to the person who designs it
There is no account manager between you and the fixture design. A question about clamp access gets answered by the person who will model the clamp.
Price bands are published, not negotiated blind
Ranges for every family are on this site. You can tell in advance whether the project is a 900-dollar fixture or a 30,000-dollar one, before anyone spends a week on a quote.
Prove-out before it ships
Assembled, pressure-tested, trial-cut, measured. You get the video and the CMM report with the crate, not after the first problem.
03
Published price bands, 2026
Indicative FOB ranges for standard configurations. A drawing with a tolerance stack moves the number within the band; nothing outside it is quoted without telling you why.
| Configuration | Price band | Lead time |
|---|---|---|
| Manual / pneumatic single-station | USD 300 – 2,500 | 3–5 weeks |
| Precision vises, dividing heads, mandrels | USD 420 – 4,800 | 3–6 weeks |
| Hydraulic multi-station, built to drawing | USD 3,500 – 45,000 | 6–10 weeks |
| Tombstones and 5-axis rotary fixtures | USD 6,000 – 45,000 | 6–10 weeks |
| Axle housing and large castings | USD 8,000 – 32,000 | 8–12 weeks |
| Carbide inserts (stock geometries) | USD 6 – 28 / pc | 3–7 days |
Send a drawing
FOB Liuzhou, indicative for standard configurations. A drawing moves the number inside the band.
- 1 pc Minimum order
- USD 8,000 – 32,000 — Axle housing and large castings
- Do you work from a 2D drawing only?
04
Axle housing fixture, before and after clamping
Drawing and DFM review
You send the 3D model, the machine table drawing and the operations. Within 3 working days you get a note on datum choice, clamping force, distortion risk and tool access — before any price is fixed.
Quote against the band
A price inside the published band, with the reason stated if it moves to the top of it: number of stations, hydraulic unit, special clamps, inspection scope.
Design and approval
Full 3D model of the fixture, clamp sequence and, where relevant, the hydraulic schematic. Nothing is cut until you approve.
Machining, assembly, prove-out
Body machined, stress-relieved where needed, ground, assembled, pressure-tested at 1.5× working pressure, trial-cut.
Inspection and shipment
CMM report, trial-cut video, spare pins, mounting drawing. Sea or rail freight, FOB or EXW.
05
Questions buyers actually ask
What is the minimum order?
Do you work from a 2D drawing only?
How do you handle shipping to Russia and Central Asia?
Can I inspect before shipment?
What if the finished fixture does not hold tolerance?
Send a drawing and get a number
3D model, machine table drawing, the operations and the annual volume — that is enough for a quote within one working day.